dmesg - just run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.6-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Mon Aug 17 08:52:28 CEST 2015
Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb3 rw quiet loglevel=0 vga=current initrd=../initramfs-linux.img
tseg: 0000000000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7f8ffff] usable
BIOS-e820: [mem 0x00000000c7f90000-0x00000000c7f9dfff] ACPI data
BIOS-e820: [mem 0x00000000c7f9e000-0x00000000c7fdffff] ACPI NVS
BIOS-e820: [mem 0x00000000c7fe0000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: MSI MS-7599/870A-G54 (MS-7599), BIOS V17.10 03/23/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF8000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000238000000 aka 9088M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc7f90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b2f000, 0x01b2ffff] PGTABLE
BRK [0x01b30000, 0x01b30fff] PGTABLE
BRK [0x01b31000, 0x01b31fff] PGTABLE
init_memory_mapping: [mem 0x237e00000-0x237ffffff]
[mem 0x237e00000-0x237ffffff] page 2M
BRK [0x01b32000, 0x01b32fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x237dfffff]
[mem 0x220000000-0x237dfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc7f8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc7dfffff] page 2M
[mem 0xc7e00000-0xc7f8ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x7fc8a000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FAA30 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000C7F90000 000040 (v01 7599MS A7599300 20110323 MSFT 00000097)
ACPI: FACP 0x00000000C7F90200 000084 (v01 7599MS A7599300 20110323 MSFT 00000097)
ACPI: DSDT 0x00000000C7F905D0 005910 (v01 A7599 A7599300 00000300 INTL 20051117)
ACPI: FACS 0x00000000C7F9E000 000040
ACPI: APIC 0x00000000C7F90390 00007C (v01 7599MS A7599300 20110323 MSFT 00000097)
ACPI: MCFG 0x00000000C7F90410 00003C (v01 7599MS OEMMCFG 20110323 MSFT 00000097)
ACPI: OEMB 0x00000000C7F9E040 000072 (v01 7599MS A7599300 20110323 MSFT 00000097)
ACPI: SRAT 0x00000000C7F9A5D0 000108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000C7F9A6E0 000038 (v01 7599MS OEMHPET 20110323 MSFT 00000097)
ACPI: SSDT 0x00000000C7F9A720 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x237ffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x237ffffff] -> [mem 0x00000000-0x237ffffff]
NODE_DATA(0) allocated [mem 0x237ffa000-0x237ffdfff]
[ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000237ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000c7f8ffff]
node 0: [mem 0x0000000100000000-0x0000000237ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
On node 0 totalpages: 2096942
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12735 pages used for memmap
DMA32 zone: 814992 pages, LIFO batch:31
Normal zone: 19968 pages used for memmap
Normal zone: 1277952 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
PM: Registered nosave memory: [mem 0xc7f90000-0xc7f9dfff]
PM: Registered nosave memory: [mem 0xc7f9e000-0xc7fdffff]
PM: Registered nosave memory: [mem 0xc7fe0000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc8000000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xc8000000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880237c00000 s95576 r8192 d31400 u262144
pcpu-alloc: s95576 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064154
Policy zone: Normal
Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb3 rw quiet loglevel=0 vga=current initrd=../initramfs-linux.img
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xbc000000-0xbdffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
Memory: 8108940K/8387768K available (5699K kernel code, 893K rwdata, 1732K rodata, 1180K init, 1152K bss, 278828K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
NR_IRQS:8448 nr_irqs:472 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2799.980 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.29 BogoMIPS (lpj=9333266)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a08000 - ffffffff81a0d000)
ftrace: allocating 21563 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, model: 0a, stepping: 00)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
process: Switch to broadcast mode on CPU1
#2
process: Switch to broadcast mode on CPU2
#3
process: Switch to broadcast mode on CPU3
#4
process: Switch to broadcast mode on CPU4
#5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (33613.74 BogoMIPS)
process: Switch to broadcast mode on CPU5
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xc7f9e000-0xc7fdffff] (270336 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 5:56:43, date: 09/13/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c8000000 aka 3200M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c8000000, dfffffff]
TOM2: 0000000238000000 aka 9088M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc8000000-0xdfffffff]
bus: 00 [mem 0x238000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007]
pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003]
pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f]
pci 0000:00:11.0: reg 0x24: [mem 0xfcfffc00-0xfcffffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfcfff800-0xfcfff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfcffd000-0xfcffdfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfcfff400-0xfcfff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfcffc000-0xfcffcfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfcffb000-0xfcffbfff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfcfff000-0xfcfff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xa800-0xa87f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe8f8000-0xfe8fbfff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff]
pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10b5:8112] type 01 class 0x060400
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: PCI bridge to [bus 02-03]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:04.0: [13f6:8788] type 00 class 0x040100
pci 0000:03:04.0: reg 0x10: [io 0xb800-0xb8ff]
pci 0000:03:04.0: supports D1 D2
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc8000000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci 0000:06:00.0: [197b:2368] type 00 class 0x010185
pci 0000:06:00.0: reg 0x10: [io 0xd800-0xd807]
pci 0000:06:00.0: reg 0x14: [io 0xd400-0xd403]
pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd007]
pci 0000:06:00.0: reg 0x1c: [io 0xc800-0xc803]
pci 0000:06:00.0: reg 0x20: [io 0xc400-0xc40f]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0xc000-0xdfff]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:07:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [mem 0xfbff8000-0xfbffbfff 64bit pref]
pci 0000:07:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc7f90000-0xc7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] could not be reserved
system 00:03: [io 0x0b00-0x0b1f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:03: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0600-0x06df] has been reserved
system 00:04: [io 0x0ae0-0x0aef] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [mem 0x00100000-0xc7ffffff] could not be reserved
system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff]
pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:09.0: PCI bridge to [bus 02-03]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xc8000000-0xdfffffff window]
pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:06: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:07: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3544K (ffff88007fc8a000 - ffff880080000000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ bc000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
microcode: CPU0: patch_level=0x010000bf
microcode: CPU1: patch_level=0x010000bf
microcode: CPU2: patch_level=0x010000bf
microcode: CPU3: patch_level=0x010000bf
microcode: CPU4: patch_level=0x010000bf
microcode: CPU5: patch_level=0x010000bf
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
Magic number: 15:413:921
rtc_cmos 00:00: setting system clock to 2015-09-13 05:56:44 UTC (1442123804)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1180K (ffffffff818e1000 - ffffffff81a08000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 432K (ffff880001594000 - ffff880001600000)
Freeing unused kernel memory: 316K (ffff8800017b1000 - ffff880001800000)
random: systemd-tmpfile urandom read with 3 bits of entropy available
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff800
libata version 3.00 loaded.
ohci-pci: OHCI PCI platform driver
scsi host0: pata_jmicron
scsi host1: pata_jmicron
ata1: PATA max UDMA/100 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 16
ata2: PATA max UDMA/100 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 16
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfcfff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfcfff000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfcffe000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffd000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffc000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfcffb000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 27
ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 27
ata5: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 27
ata6: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 27
scsi host6: pata_atiixp
scsi host7: pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 1-5: new high-speed USB device number 2 using ehci-pci
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 5-5: new low-speed USB device number 2 using ohci-pci
ata6: SATA link down (SStatus 0 SControl 300)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Primax Kensington Eagle Trackball as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/0003:047D:2048.0001/input/input2
hid-generic 0003:047D:2048.0001: input,hidraw0: USB HID v1.11 Mouse [Primax Kensington Eagle Trackball] on usb-0000:00:13.0-5/input0
usb 1-5.4: new full-speed USB device number 3 using ehci-pci
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: ATAPI iHAS324 B, AL14, max UDMA/100
ata5.00: configured for UDMA/100
ata4.00: ATA-8: MRSAD4B120GC225C00, MRV1.3.3, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: INTEL SSDSC2BW180A4, DC32, max UDMA/133
ata3.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2BW18 DC32 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA MRSAD4B120GC225C .3.3 PQ: 0 ANSI: 5
scsi 4:0:0:0: CD-ROM ATAPI iHAS324 B AL14 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 3:0:0:0: [sdb] Attached SCSI disk
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.0/0003:045E:07A5.0002/input/input3
hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:12.2-5.4/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.1/0003:045E:07A5.0003/input/input4
hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:12.2-5.4/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.2/0003:045E:07A5.0004/input/input5
tsc: Refined TSC clocksource calibration: 2799.994 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3aeaff3, max_idle_ns: 440795255742 ns
hid-generic 0003:045E:07A5.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:12.2-5.4/input2
Switched to clocksource tsc
floppy0: no floppy controllers found
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Login Prompts.
systemd[1]: Reached target Paths.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted Debug File System.
EXT4-fs (sdb3): re-mounted. Opts: data=ordered
systemd[1]: Mounted Temporary Directory.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
ACPI: processor limited to max C-state 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
acpi-cpufreq: overriding BIOS provided _PSD data
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x41
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000c6ab00). heartbeat=60 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input8
MCE: In-kernel MCE decoding enabled.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Initialized drm 1.1.0 20060810
systemd[1]: Started Journal Service.
r8169 0000:07:00.0 eth0: RTL8168d/8111d at 0xffffc90000c6e000, 6c:62:6d:57:81:50, XID 081000c0 IRQ 28
r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
systemd-journald[195]: Received request to flush runtime journal from PID 1
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
mousedev: PS/2 mouse device common for all mice
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
r8169 0000:07:00.0 enp7s0: renamed from eth0
microcode: CPU0: new patch_level=0x010000dc
microcode: CPU1: new patch_level=0x010000dc
microcode: CPU2: new patch_level=0x010000dc
microcode: CPU3: new patch_level=0x010000dc
microcode: CPU4: new patch_level=0x010000dc
microcode: CPU5: new patch_level=0x010000dc
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: Calling CRDA to update world regulatory domain
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.41 Fri Aug 21 23:09:52 PDT 2015
r8169 0000:07:00.0 enp7s0: link down
r8169 0000:07:00.0 enp7s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 7
r8169 0000:07:00.0 enp7s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
random: nonblocking pool is initialized
floppy0: no floppy controllers found
cfg80211: Calling CRDA to update world regulatory domain
fuse init (API version 7.23)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
QXcbEventReader[482]: segfault at 7f0d52e88ca9 ip 00007f0d52e88ca9 sp 00007f0d5090fde0 error 14 in locale-archive[7f0d53339000+4ce000]
QXcbEventReader[471]: segfault at 7efd4638eca9 ip 00007efd4638eca9 sp 00007efd43e15de0 error 14 in locale-archive[7efd4683f000+4ce000]
QXcbEventReader[481]: segfault at 7f26a6c91ca9 ip 00007f26a6c91ca9 sp 00007f26a4718de0 error 14 in locale-archive[7f26a7142000+4ce000]
QXcbEventReader[492]: segfault at 7f60f7987ca9 ip 00007f60f7987ca9 sp 00007f60f540ede0 error 14 in locale-archive[7f60f7e38000+4ce000]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
nvidia_uvm: Loaded the UVM driver, major device number 249
ntfs: driver 2.1.32 [Flags: R/W MODULE].
ntfs: volume version 3.1.
ntfs: (device sda1): load_system_files(): Windows is hibernated. Mounting read-only. Run chkdsk.
ntfs: volume version 3.1.
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 7
QXcbEventReader[11140]: segfault at 7fdd10d3bca9 ip 00007fdd10d3bca9 sp 00007fdd0e0eede0 error 14 in libattr.so.1.1.0[7fdd111ec000+4000]